20'' x 2.5" Sediment Water Filter Replacement Cartridge Whole House

In stock
Regular price $24.99

What is a sediment water filter cartridge?
It's usually placed as the first stage of the water filtration system to remove rust, iron, sand, silt and particulates from water. As the first line of defense in the filtration system. It's a best choice for removing fine sediment from well water / hard water / city water / municipal water / drinking water, etc.

What is a micron rating?

The unwanted particles found in water are measured in microns. For example, a filter with a micron rating of 5 will filter out contaminants of 5 micron or larger. Our filter with 99% efficiency rating removes 99% of the particles at all above the 5 micron size.

How to choose the right size?

If you choose the right size for your housing, there are not great influence on the flow rate when you replace them. The size is small: there is a significant drop in flow rate.The size is large: there is still some sediment in your water. Please make sure the size is meet your need before ordering.

Standard Dimension:

20 inches x 2.5 inches 5 micron polypropylene sediment filter cartridge. Compatible with a wide rage of industrial filter housings and the whole house filter housings. It is widely used in whole house filtration system, as pre-filter for water softener system.


Remove 99% rust, silt, sand, iron and other undissolved particles in dirty water. As the first line of defense in the filtration system, protect your water using appliances and plumbing for cleaner water, improve water quality and taste.


Material: 100% Polypropylene; Flow Rate: 8 GPM; Max.Operating Temperature: 176℉; Max.Operating Pressure at 158℉: 15psi; Max.Operating Pressure at 68℉: 50psi.


For better water quality, recommended replace TWO or THREE times a year, depending on the quality of the original water source and application type. Recommended change out differential pressure is 30psi(2.1bar).

NSF Certification:

Compare to string wound filter, this filter using unique hot melt technology, no fibers falling, avoid second pollution to liquid.

High Quality Material:
The sediment filter cartridge is made of 100% polypropylene which cause no pollution to water. Food grade material, non toxic and tasteless. Keep water clean and fresh, provide a healthy life for you and your family.

Multi-Layer Structure:

Three separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter.

The important thing to know about sediment filters is that they only reduce sediment. They don't remove chemicals or heavy metals or make the water taste or smell better.

Compatible Brands:

Compatible for GE, Aquasana, Flow-Pro 3M, GE, Culligan, Dupont, Pentek, Omni, Kenmore, Omnifilter, Whirlpool,Filtrete, etc. 

Compatible Models:
Compatible for Clack Corporation 31052000, Flow-Pro FPMB6-20, GE Hytrex GX05-20, GE Osmonics MB-05-20, 1013240, GE Purtrex PX05-20,Aquasana EQ-304-20,etc.

Package List:

1 Pack: 1x 5 Micron 20"x2.5" Sediment Water Filter

2 Pack: 2x 5 Micron 20"x2.5" Sediment Water Filters

4 Pack: 4x 5 Micron 20"x2.5" Sediment Water Filters

6 Pack: 6x 5 Micron 20"x2.5" Sediment Water Filters

12 Pack: 12x 5 Micron 20"x2.5" Sediment Water Filters

25 Pack: 25x 5 Micron 20"x2.5" Sediment Water Filters

50 Pack: 50x 5 Micron 20"x2.5" Sediment Water Filters


    20 Micron pleated water filter replacement cartridge is fits most 10" filter housings for bench top, under-sink or whole house filtration system. Pre-filter for residential, commercial and industrial applications
    As the first line of defense in the filtration system, it can effectively prevent the clogging of water pipes and prolong the service life of water equipment. Please note this filter can't remove chlorine to improve water taste.
    Filters up to 15,000-20,000 gallons water.The filtered capacity and change-out cycle depends on inlet water quality or filters's running/using time every day. For better water quality, filters should be replaced regularly.
    This filter can be washable for multiple times, but it's working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water.
  • Dimension:
    10"*2.7" - 9 7/8 inches (length) x 2 3/4 inches ( outer diameter )
    10"*4.5" - 9 7/8 inches (length) x 4 1/2 inches inches ( outer diameter )
    20"*4.5" - 20 inches (length) x 4 1/2 inches inches ( outer diameter )  
Water filter feature
Water filter feature